Check Offer listing
As well as deciding on household improvement and private item is especially important for you. We've developed our productive from our lengthy occasions encounter within the enterprise. AmpFlow had been escalating our program to make and modify outcome of advertising and marketing and advertising our own item each and every now and then and we're supplying you having a opportunity to genuinely feel our new item AmpFlow E30-400-G Electric Gearmotor, 12V, 24V, or 36V DC, 680 RPM might be the summary of our difficult operate to make sure you that we are your household member. From this time on you could uncover that's not too difficult for you and your family members to have a merely comfy lifestyle and take pleasure in your time using the men and women individuals that you simply really like by spending tiny of the spending budget.
AmpFlow E30-400-G Electric Gearmotor, 12V, 24V, or 36V DC, 680 RPM is our proud and fantastic item that was developed from our wonderful design idea and such as using the clever production to create the result of it. We have concentrated in each and every step away of manufacturing procedure; we think that you simply will be entirely satisfied by our new item.
The consumer service associates usually are going to make an atmosphere of confidence and recognizing. And go on a actually modern day strategy to deal with queries concerning the item that we offer which can be a significant focal point in our buyers, individually and economically.
Click here to see the AmpFlow E30-400-G Electric Gearmotor, 12V, 24V, or 36V DC, 680 RPM full review
The AmpFlow speed reducer is a heavy-duty, low-cost, gearhead that works with any of the three-inch diameter AmpFlow motors. It uses a unique arrangement of roller chains and sprockets rather than gears. This results in torque and efficiency comparable to gear-type reducers at just 1/2 or even 1/3 of the cost of high-torque, geared speed reducers.
These speed reducers are made with a three-piece aluminum case that has been precision CNC machined. The case measures 6 x 3 x 2 inches. The hardened output shaft is 3/4-inch diameter and 2.2 inches long. It has a 1/4-inch keyway and a 5/16-24 tapped hole. The long output shaft makes it easy to mount wheels, pulleys, sprockets, or gears. Four long 1/4-20 mounting bolts are supplied with the unit.
The reduction ratio is 8.3:1. The backlash is about +/- 1.2 degrees, and the gearhead has been tested to a failure point of 3500 inch-pounds, (395 Nm), of torque.
The motor attached to this speed reducer is the AmpFlow E30-400. (Other motors are also available). This motor is designed to deliver good performance and efficiency at an economical price. This is achieved by the use of four brushes and advanced electromagnetic computer modeling and design.
These motors are made from two sturdy aluminum castings and a seamless body. The E30-400 motor is 3.1 inches in diameter and 5.8 inches long. There is a short 3/8-inch diameter shaft on the rear of the motor for mounting an optical encoder. The heavy-gauge 12 AWG motor leads are 18 inches long. The motor is finished in a high-quality black powder-coat.
This reversible gear motor can be used at voltages ranging from 12V to 36VDC. At 24 Volts it has the following performance: The no-load speed is 680 RPM. It develops a maximum of 2.1 horsepower and a maximum stall torque of 770 in-lbs. This gearmotor weighs 9.4 pounds.
Wheels, ranging in size from 4 inches to 12.5 inches, are available. Search Amazon for "AmpFlow WheelMotors"
Feature
- Gearhead measures 6 x 3 x 2 inches. The motor is 5.8 inches long.
- No-load RPM: 680 at 24 Volts
- Voltage range: 12V to 36VDC.
- Maximum power: 1580 Watts, (2.1 horsepower)
- Maximum stall torque: 87 Nm, (770 in-lbs.)
No comments:
Post a Comment